Page 1 of 1

Icom T2H handheld

Posted: Wed Aug 16, 2023 11:05 pm
by MaxAA5KK
I have 2 Icom T2H VHF handheld talkies. $100 for both or $50 for one.

Frequency Coverage:
Tx: 144-148 MHz; Rx: 136-174* MHz (*144 -148 MHz guaranteed)
Mode: FM
Number of memory channels: 43 (40 regular, 2 scan edges and 1 call)
Frequency stability: ± 10 ppm (0°C to +50°C)
Operating Temperature Range: -10°C to +60°C; +14°F to +140°F.
Power supply requirement (negative ground): 9.6 V DC (supplied Ni-Cd cells)
Current Drain (at 9.6 V DC):
Transmit (6.0 W): 1.6 A typical; Transmit (1.0 W): 0.7 A typical
Receive (power saved): 25 mA (typ.); (standby): 80 mA (typ.); (rated audio): 210 mA (typ.)
Antenna connector: BNC (50)
Dimensions (mm/in): 58(W) x 140.5(H) x 32(D) mm; 2.32(W) x 5.5(H) x 1.32(D) in
Weight (approx, w/antenna and battery): 420 g (14.8 oz.)


Transmitter
Output power (at 9.6 V DC): 6 W High, 1 W Low (typical)
Modulation: Variable reactance frequency modulation
Max. frequency deviation: ±5.0 kHz
Spurious emissions: Less than -60 dB
External mic connector: 3-conductor, 2.5 (d) mm (1/10")/2k


Receiver
Receiver system: Double conversion superheterodyne
Intermediate frequencies:
1st: 30.85 MHz
2nd: 450 kHz
Sensitivity (typ. for 12 db SINAD): 0.14 µV
Squelch sensitivity (typ. at threshold): 0.16 µV
Selectivity: More than 15 kHz/-9 dB, Less than 30 kHz/-60 dB
Spurious and image rejection: 60 dB (typical) (more than -45 dB: half image point, except 2nd image)
Audio output power (at 9.6 V DC): 500 mW (typical with an 8 load)
External speaker connector: 3-conductor, 3.5 (d) mm (1/8")/8
Max.phipps@icloud.com - 903-8209722