Icom IC-2720 *SOLD*

This forum allows members the opportunity to post items for sale and trade. If you have items please post an image, description, condition, and price. Buyers may post interest in product, but please keep personal information off the forum.
Post Reply
MaxAA5KK
Posts: 3
Joined: Wed Aug 16, 2023 11:03 pm

Icom IC-2720 *SOLD*

Post by MaxAA5KK »

I have 2 Icom IC-2720, selling for a friend of mine. $200 each. These can do cross band repeat.
https://www.universal-radio.com/catalog ... /0272.html
Frequency coverage Transmit (USA Version)
VHF: 144-148 MHz
UHF: 440-450 MHz
Frequency coverage Receive (USA Version)
Left Side: 118-550 MHz
Right Side: 118-174, 375-850, 810-999.99 MHz (less cellular)
Mode: FM, AM* (* U.S.A. version, RX only; 118-136 MHz; not guaranteed.)
Number of memory channels: 212 (including 2 call and 10 band edge channels)
Antenna connector: SO-239 (50 ohms)
Power Supply requirement: 13.8 V DC ±15%
Useable temperature range: +14 to +140 °F, -10 to +60 °C
Frequency stability: ±10 ppm
Tuning step increments: 5, 10, 12.5, 15, 20, 25, 30 and 50 kHz
Current drain (at 13.8 V DC)
Receive squelched 1.2 Amps
Maximum audio output 1.8 Amps
Transmit at high power VHF 12 Amps, UHF 11 Amps
Main Unit Dimensions (projections not included):
5.5 x 1.65 x 7.4 inches 2.6 Lbs (140x40x187 mm 1.17 kg).
Controller Dimensions (projections not included):
5.5 x 2 x 1.2 inches 6 ounces (140x50x27 mm 150 g).


Transmitter
Output power:
VHF 50 W, 15 W, 5 W selectable
UHF 35 W, 15 W, 5 W selectable
Modulation system: variable reactance frequency modulation
Max. frequency deviation: ±5.0 kHz
Spurious emissions: Less than -60 dB
Microphone connector: 8-pin modular jack (600 ohms)


Receiver
Receive system: Double conversion superheterodyne
Intermediate frequencies (Left/Right): 1st 38.85/450 kHz 2nd 46.05 MHz/455 kHz
Sensitivity: Less than 0.18 micro V for 12dB SINAD
Squelch Sensitivity: 0.13 micro V (at threshold)
Selectivity:
More than 12 kHz -6 dB
Less than 30 kHz -60dB
Spurious rejection ratio: More than 60 dB
Audio output (at 13.8 V DC): More than 2.4 W at 10% distortion with an 8-ohm load
Ext. speaker connector: 2-conductor 1/8" (3.5 mm), 8 ohms
max.phipps@icloud.com - 903-820-9722
Post Reply